Spare Sheet for Bambu Cool Plate for Bambu Lab X1 and P1 series

OverviewnThe Bambu Cool Sheet is a sheet with an adhesive side for replacing the sheet on your Cool Plate.nnCompatibilitynX1 Series and P1 SeriesnnNotenThe Bambu Cool sheet is easy to replace and install.nnAfter tearing off the original sheet, please use alcohol to wipe the surface clean. Make sure the surface stays dry while applying a new sheet.nnYou can use an anhydrous ethanol solution or isopropanol solution with a concentration of over 90% to wipe the plate.nnYou can also use detergent and water to clean the surface.nIt is also best to use special solid glue (Glue Stick for Build Plate) before printing to avoid damage during model removal.nnHINTS: The STL file of the "Fixture" shown in the video can be found in the printer internal memory or download from here！nnHow to print your Film Sticking Fixture？nBambu Lab 3D printer with two film sticking fixture models to help you change spare sheets. Print 'Film Sticking Fixture' from the built-in files!nn nnRecommended settings for Bambu Cool PlatenPlease note that other slicer settings might need to be adjusted based on the printed model and the filament requirements.nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

	Hotbed Temperature	Glue Stick Required?	Upper Glass Cover Plate Removed?
PLA/PLA-CF/PLA-GF	35~45℃	Yes	Either
TPU	30~35℃	Yes	Either
PVA	35~45℃	Yes	Either

n

Bambu Lab, Bambu Lab P1 printers, Bambu Lab P1S, Bambu Lab X1, Bambu Lab X1C printers, Cool Plate