Reusable High-Strength Liquid Threadlocker VIBRA-TITE VC-3 Threadmate (VT213 Red 4.5ml)

Vibra-Tite VC-3 is a reusable, low off-gassing, acrylic polymer-based thread locker that dampens and absorbs vibration. Vibra-Tite VC-3 dries to the touch within minutes of application, and coated parts are ready for assembly after only half an hour of waiting.nnIt does not cure permanently (like other anaerobic thread lockers).nnVibra-Tite VC-3 adheres to ferrous and non-ferrous metals, most coatings, wood and plastics.nnThe fastener is easy to adjust, remove and reuse.nnWorks with fasteners of all shapes and sizes: from tiny eyeglass screws to large construction boltsnnWorks with both male and female threads.nnParts coated with Vibra-Tite VC-3 can be stored indefinitely until they are used for assembly.nnAssemblies assembled with VC-3 can be easily adjusted, disassembled with standard hand tools, and reused.nnAfter disassembly, Vibra-Tite VC-3 remains on the threads in a thick layer, in an elastic viscous statennParts pretreated with Vibra-Tite VC-3 can be assembled underwater.n

Key features:

n- high thread fixation strengthnn- works in conditions of extreme vibrationsnn- thread diameter: M1-M38nn- does not require thorough surface cleaning: remove visible traces of oil / grease / grease / dirt before applicationnn- working time: 1 minutenn- tear-off torque: not applicablenn- type of curing: does not curenn- number of re-uses: 5nn- complies with NASA SP-R-0022A standardsnn- chemical base: acrylicnn- solvent: methyl ethyl ketone (MEK)nn- flammability: yes (flammable liquid)nn- odor: similar to solvent odornn- sensitivity threshold: not determinednn- minimum working temperature: -53 °Cnn- maximum working temperature: +74°Cnn- maximum viscosity: 300 cubic centimeters per second.n

Application instructions:

nMake sure the material is well mixed before application.nnApply Vibra-Tite VC-3 with a standard coating length (1.5 times the diameter of the part) to achieve a thread fill of 30% to 50%.nnAlthough Vibra-Tite VC-3 dries to the touch within a few minutes, it should be allowed to dry for at least 30 minutes before reassembling the part.nn

Threadmate, VIBRA-TITE