original textured PEI plate from Bambu Lab (compatible with X1/P1/A1)

Original textured PEI plate from Bambu LabnExcellent adhesion to the first layer, increased durabilitynnAfter optimizing the production process of Bambu Lab's textured PEI plate, the durability of the plate has improved. In addition, the adhesion between the prints and the plate is significantly improved, eliminating the need for adhesive.n*In some situations, adhesive is required for very specific filamentsnnSelf-releasing when coolednnPEI is an excellent material for 3D printing due to its ability to withstand the repeated heating and cooling cycles of the printer's heating surface. Prints are easily removed when the heater temperature reaches room temperature, so we always recommend waiting until it reaches 35℃ or lower. If the print is still stuck to the plate, simply bend the steel plate and the model will fall right into your hands.nnCompatible with a variety of filamentsnnPEI allows you to print not only common materials such as PLA, TPU, and PETG, but also materials that require high temperatures such as ABS and nylon.nnPrevent warping with reliable magnetic adhesionnnBambu Lab's PEI textured plate features a 0.5 mm thick stainless steel plate that improves magnetic adhesion. This helps prevent deformation and ensure optimal 3D print quality by reducing the likelihood of the first layer detaching due to deformation. It also helps when printing large models made of materials that are prone to warping, such as ABS, PC, and nylon.nnTextured surfacennBambu Lab's PEI textured plate offers a unique first layer surface. Through a powder coating process, this PEI build plate creates a durable texture that adds texture to your prints.nnRecommended settingsnnPlease note that other slicer settings may need to be adjusted to suit your printed model and filament requirementsnnnnn nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Materials.	Heating temperature	Do you need a glue drip?	Top glass cover removed?
PLA/PLA-CF/PLA-GF	45~60 ℃	None	Yes
ABS	90~100 ℃	None	None
PETG/PETG-CF	60~80 ℃	None	None
PET-CF	80~100 ℃	None	None
TPU	35~45 ℃	Yes	Yes
ASA	90~100 ℃	None	None
PVA	45~60 ℃	None	Yes
PC/PC-CF	90~110 ℃	Yes	None
PA/PA-CF/PAHT-CF	90~110 ℃	Yes	None

nnnnnPlease noten

n
• Increasing the bed temperature enhances adhesion. Users need to adjust the heat bed temperature to their specific requirements to achieve the most suitable level of adhesion.
n
• Before automatic leveling, it is necessary to rub the nozzle several times in the special wiping area of the work plate to completely remove any residual material on the tip of the nozzle. The coating in the specially designed cleaning area gradually wears off over time. This is normal and does not affect print quality or nozzle life, so there is no need to worry about any quality issues.
n
• Dust and grease deposits on the build plate reduce adhesion. It is recommended to clean the surface regularly with detergent and water to maintain the best adhesion.
n
• Bambu Lab recommends using only official Bambu Lab adhesive on Bambu Lab building plates and is not responsible for any damage to the plates resulting from the use of third-party adhesive on the building plates. Do not clean textured PEI with acetone as this will damage the PEI surface.
n
• Always wait a few minutes before removing printed models to allow the plate to cool for easy print removal. This prevents damage to the plate and ensures a long product life.
n
• Gently sanding the surface with fine grit sandpaper (600 grit recommended) can help restore adhesion.
n
• The automatic flow rate calibration on a textured PEI plate is not as reliable as other smooth plates. If you get inconsistent results, we recommend calibrating with a smooth plate.
n
• The textured PEI plate is considered a consumable that deteriorates over time. The manufacturer's warranty only covers manufacturing defects and not cosmetic damage such as scratches, dents, or cracks. The manufacturer's warranty only covers defective sheets upon arrival.
n

nProduct specificationnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Material	nnPEI powder coating + stainless steel magnetic platen
nnSurface heat resistancen	Up to 180℃
Stainless steel plate thickness	nn0,5 mmn
nnThickness of textured PEI coatingn	nn0,075 mmn
nnnnSize for printingnnn	nn256*256 mmn
nnThe size of the packagen	nnnn300*270*17 mmnnn
nnWeight of the packagen	nn450 gn
nnnnColornnn	nngoldn

nn

Bambu Lab, Bambu Lab A1, Bambu Lab P1 printers, Bambu Lab X1, PEI