Inslogic Nylon PA6/66 Filament (Natural Nylon Copolymer) 1kg

Код товару: 32007-01 Артикул: 31512

Все про товар

Опис

Характеристики

Відгуки 0

Питання0

Новинка

Закінчується

Inslogic Nylon PA6/66 Filament (Natural Nylon Copolymer) 1kg

В наявності

3 168 грн.

Знайшли дешевше?

Купити цей товар в 1 клік:

AMS-сумісність:yes

виробник філаментів::Inslogic

колір філаменту::natural

тип філаменту::PA6

Inslogic Nylon PA6/66 Filament (Natural Nylon Copolymer) 1kg

3 168 грн.

Опис

Product Description: Inslogic Nylon PA6/66 Filament (Natural, 1 kg)

nInslogic Nylon PA6/66 is a high-quality nylon copolymer filament designed for users seeking exceptional strength, durability, and versatility in 3D printing. Key features include: n

Minimal warping
Enhanced layer adhesion
High tensile strength

nThanks to its unique formula, this material can be printed at lower temperatures than traditional PA6 or PA66 filaments without sacrificing mechanical performance. This makes it a great choice for end-use parts, tools, and functional prototypes. n

Main Benefits of Nylon PA6/66:

Excellent wear resistance
Resistance to impact, abrasion, oils, fuels, and lubricants
Low friction coefficient
High melting point: 198 °C
Ideal for functional components like gears and guides

Important Note:

nNylon is a hygroscopic material and absorbs moisture from the air. To avoid printing issues: n

Store it in an airtight container with desiccant
Dry the filament before printing, especially if it was exposed to air

Physical and Mechanical Properties:

Filament diameter: 1.75 mm ± 0.02 mm
Length: 370 m
Net weight: 1 kg
Total weight with spool: 1.233 ± 0.03 kg
Tensile strength: 79 MPa
Elongation at break: 32%
Flexural strength: 103 MPa
Flexural modulus: 2397 MPa
Izod impact (notched): 6.63 kJ/m²
Heat deflection temperature (0.45 MPa): 123 °C
Density: 1.08 g/cm³

n*All values tested in lab conditions. Properties may vary based on part geometry, print orientation, and printer settings. n

Recommended Print Settings:

Drying: n
- 80 °C for 48 hours
- 110 °C for 3 hours (refill without spool)
n
Nozzle temperature: n
- 250–270 °C at 50–100 mm/s
- 270–280 °C at 100–150 mm/s
n
Bed temperature: 30–50 °C
Cooling fan: 100%
Build surface: textured PEI sheet
Glue and heated chamber: recommended for large prints