DIY kit for printing and creativity - mini RGB LED waterproof lights with remote control by Bambu Lab

Код товару: 30969-01 Артикул: 27149

Все про товар

Опис

Характеристики

Відгуки 0

Питання0

Новинка

DIY kit for printing and creativity - mini RGB LED waterproof lights with remote control by Bambu Lab

В наявності

864 грн.

Знайшли дешевше?

Купити цей товар в 1 клік:

виробник комплектуючих::Bambu Lab

DIY kit for printing and creativity - mini RGB LED waterproof lights with remote control by Bambu Lab

864 грн.

Опис

nnnnnnMini RGB LED waterproof light fixturennQuantity/each: 6nnRemote control: 1nnnnnn

nnnnnn3D model Instruction (EN)nnnnnnnnnnnnnn

Models	Creators	Model Links
nnnnMushroom on A Shelfnnn	NUKDDD	Mushroom on A Shelf

nnnnnn

nnnnnnnnnnWorth noting:n

The remote control is not waterproof, please keep it away from water sources.
The remote control distance of the infrared remote control is 5-10 meters.
When the remote control is working normally, after pressing OFF and pressing ON again, the light will return to the working mode before OFF.
Multiple lights receive remote control commands at the same time: the remote control is operated through the receiver (black dot) on the light. Within the effective distance of the remote control, please aim at the light to control.
The remote control still cannot be operated after replacing the battery: If the remote control still cannot operate the light after replacing the 2*CR2032 batteries, it is recommended to check and replace the remote control battery 1*CR2025
If the lighting and remote control are not used for a long time, it is recommended to install a battery insulation sheet or remove the battery to extend the battery life.

nBattery life and replacementnnThe battery life is approximately 16 hours after each use. If the indicator light is only red and does not respond to the remote control, 2 CR2032 batteries may need to be replaced. If the remote control still cannot control the light, consider replacing the remote control battery (battery type CR2025). If the device is not used for a long time, it is recommended to remove the battery or replace the insulation layer.n

Product Specifications

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

LED Type	3528
Number of LEDs	3
Number of Colors	13
Control Modes	Static color, Gradient, Flash
Power Supply	CR2032 * 2
Input Voltage	6V
Power	0.6W

nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Material	PS
Remote Control Type	Infrared
Remote Control Distance	10 meters
LED Efficiency	100 lm/w
Working Hours	16h
Waterproof Rating	IP68
Remote Control Dimensions	38.50.6 cm

nnnnnnnnnn

In the box

nnnnnnnnnnnnnnnnnnnnnnnnnn

Item Number	Item Name	Quantity
1	Mini Waterproof RGB LED Tea Lights	6
2	Remote Control	1

nnnnnnnnnnnnnnnn

3d models, 3D printed lamp, 3d-art, Bambu Lab, DIY

Характеристики

виробник комплектуючих:

Bambu Lab

Відгуки

Відгуків про цей товар ще не було.

Немає відгуків про цей товар, станьте першим, залиште свій відгук.

Питання та відповіді

Додайте питання, і ми відповімо найближчим часом.

Немає питань про даний товар, станьте першим і задайте своє питання.